3mm in-line led red light, 3mm in-line led green light, 3mm in-line led blue light

Supporter shaping：

Shaping of the supporter must be conducted before welding. While shaping, the

bending position of the supporter must at least be located at 3mm from the bottom

of the encapsulating resin. Also, avoid multiple bending on the same position。 Please

choose the

appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure

on resin. Using the jointing section of the pin and resin as fulcrum is strictly

prohibited since the pressure mounted would directly damage the internal 。

illuminating structure and thus cause irreversible defection of the product..Due to the

same reason, the interval between the welding hole on the PCB board should be

strictly matched with the pin interval of the product when assembling the product.